November 5, 2016
Posted by on
I’ve always kept my media on a second drive in my linux box and backed it up to a remote NAS. While a perfectly acceptable setup, what I always wanted was two mirrored drives with all my data. The computer already a WD Red 1TB drive so I thrilled when I found another of the exact same drive for $67. Always a best practice to use the same model when building a mirrored RAID1.
I bought a Syba 2-port SATA RAID controller card that plugged into the empty PCI-e slot on the motherboard. It was only $25, but honestly if I had a motherboard with more features, I wouldn’t have needed it. Nonetheless, after moving the drives around in the case so the power connectors would match up to all the drives, I booted the computer and used CTRL-R immediately to get to the card’s BIOS to setup the RAID. It didn’t initially recognize all the drives, so I booted into Ubuntu and used the program Disks to format the new drive. (I also edited /etc/fstab and took out the reference to the old single drive). Rebooting again, the card recognized both drives, and then setup them up as a RAID1 using the card’s BIOS utility.
Continuing into Ubuntu, I again ran Disks and formatted the new single drive. I then edited /etc/fstab with the new mount point (which I had to create), and then ran a sudo mount -all to access it.
Now it’s time to copy everything back to my new mirrored data drive. Remember, when it comes to data, you must have two copies of everything you’d ever expect to keep. But two drives mirrored are really only one copy (think accidental erase), so I’ll still need to keep a backup of files I want to keep forever.